Fit it, commission it, walk away.
Sunkeep is an appliance, not a software project. It arrives pre-installed: you wire it in, run a guided setup in a browser, and leave. From then on we maintain it, and customers contact us for help, not you.
Commissioning, start to finish
-
1
Fit the box
Put it on the home network beside the inverter, and wire any relay for a grid charger or generator.
-
2
Open the setup
A wizard in any browser. The first question is the site type. No laptop tools or vendor software.
-
3
Test each device
Add the inverter, chargers and relays. Each one has a test-connection button, so you know it works before you leave.
-
4
Save and go
Sunkeep starts planning straight away. The owner gets a dashboard; you don't get the callbacks.
Which sites it suits
Sunkeep sorts every site by how the inverter meets the grid. Here is what it does for each one today.
| Site type | What it is | What Sunkeep does today |
|---|---|---|
| Grid-decoupled | The inverter is the house's only supply. The grid reaches the battery through a separate charger. | Price-aware charging through a relay-switched charger, Emergency Mode and EV charging. This is the setup running in the field. |
| Grid-coupled | The grid supplies the house through the inverter, and the site can export. | Monitors, forecasts and plans. Buying grid power needs an external charger today; charging through the inverter itself is being tested. |
| Off-grid with generator | No grid. A generator charges the battery. | Forecasts when the battery runs low and advises when and how long to run the generator. Can start it through a wired relay. |
| Off-grid | No grid, solar only. | Forecasts and warns before the battery runs out. |
Fewer callbacks
It explains itself
The dashboard shows the plan, the forecast and what Sunkeep did, so "why did the battery do that" has an answer on screen.
Problems in plain English
A diagnostics page names what's wrong: a device gone quiet, a price feed down, an inverter fault with its start and end time.
It respects the inverter
Sunkeep doesn't take over the inverter's own safety settings. It works through the inverter, chargers and relays it is given, and refuses what it can't do safely.
We maintain it, customers contact us
Updates come from us, with one-step rollback, and never touch the owner's settings or history. When your customer has a question, they ask us.
What it connects to
Deye, proven on the SUN-16K in the field. More brands coming.
Switched through a wired Shelly relay.
OCPP 1.6J chargers on the home network.
Amber live prices, the owner's time-of-use tariff, or none at all.
Have a site in mind?
Tell us the inverter, the site type and what the owner wants from it.
brenton@hooperdata.dev